Vacancy Vacancy 17-03-26 en-us Lead Technician Monitoring / Vibration Thu, 04 Apr 2013 00:00:00 +0530 1, Lead and Perform Maintenance and Repair of Gas Turbines, Compressors, Pumps, Engines, Heat Exchangers, Pressure Vessels and the Like. He Should have Working Knowledge of Root Cause Failure Analysis (rcfa) Techniques and the Ability to Work with Craft Labours. Mechanical Technician / Vibration Thu, 04 Apr 2013 00:00:00 +0530 2.1.1 Carry Out Vibration Surveys as Designated On all Types of Rotating, Reciprocating and Static Equipment On all Company Specified Equipment. 2.1.2 Capable of Leading Lesser Skilled Personnel. 2.1.3 Responsible for Downloading the Route to Data Collector and Uploading the Vibration Data from Data Collector to Vibration Analysis Software. 2.1.4 Carry Out Borescope Inspection of Major Rotating and Stationary Equipment Using Industrial Borescopic Instrument. 2.1.5 Assist in Carry Out Vibration Analysis Using the Software that Includes Csi Software and Bently Nevada Adre 408 Sxp. 2.1.6 Assist in Preparation of Technical Reports. 2.1.7 Assist in Carry Out Recip Trap Survey for Reciprocating Machines or with Any Equivalent Engine/compressor Analysers. 2.1.8 Basic Knowledge of Computers and Trending Procedure and Drive Contractors Vehicles as Required Monitoring Technician Thu, 04 Apr 2013 00:00:00 +0530 3.1.1 Perform Troubleshoot Vibration / Acoustic and Machinery Problems Maintenance, Repair and Overhaul of Mechanical/ Machinery. 3.1.2 Capable in the Diagnosis of Mechanical Problems. 3.1.3 Capable of Leading the Lesser Skilled Personnel. 3.1.4 Perform General Housekeeping Functions Including Cleanliness of Equipment/ Machinery. 3.1.5 Capable in Maintaining Equipment Records. 3.1.6 Assist in Determining Need to Requisition Maintenance Supplies Spare Parts, Tools and Equipment. 3.1.7 to Carry Out Daily Inspection and Predictive Maintenance Checks On Rotating Machinery such as Motors, Pumps, Fans, Turbines, Compressors, Engines Blowers Etc. 3.1.8 to Perform Condition Monitoring By Checking Vibrations, Temperatures, Pressures, Checking Oil Levels & Flow and Reporting to the Condition Monitoring Engineer When the Readings are Outside Tolerable Limits. Condition Monitoring Engineer Mon, 20 May 2013 00:00:00 +0530 The Condition Monitoring Engineer Should have the Capability to Conduct Diagnostic Surveys, Remote Monitoring and Evaluation Using Vibration Spectrum Analyzer, Boroscope Equipment Etc. He Shall Be Able to Troubleshoot Vibration / Acoustic and Machinery Problems. He Shall Lead a Team of Technicians Engaged in the Collection of Vibration Measurement and other Critical Parameters Associated with Major Rotating Equipment; to Enable the Diagnosis of Trended Data as Part of the Maintenance Policy for Condition Based Maintenance. the Range of Equipment Comprises of Compressors, Gas Turbines, Blowers, Fans, Generators, High Voltage Electrical Motors, and Multi-stage Process Pumps Etc. the Condition Monitoring Engineer Shall Supervise Condition Monitoring By Checking Vibration, Temperature and Pressures. He Shall Check Oil Levels and Flows Including Steam Traps Mapping, Surveillance, Traps Analysis and Raising Work Orders. He Shall Supervise the Daily Review and Checking of On Line Monitoring System On Critical Machinery for Abnormalities and Reporting Exceptions to the Company as Well as Reliability Specialist. he Shall Liaise Effectively with the Area Coordinators to Ensure Optimum Utilization of Work Force and as per the Companys Requirements. He is Responsible for Organizing and Directing the Maintenance Work and Shall Be in Liaison with Companys Supervisory Staff. He Shall Obtain Requirement for Work and receives Permits to Work from Operations, and Distribute the Work Permits to Subordinates to Carry Out the Job. he Shall Implement and Check, that Inspection and Predictive Maintenance Checks On Rotating Machinery, such as Compressors, Gas Turbines, Blowers, Fans, Generators, High Voltage Electrical Motors, and Multi-stage Process Pumps Etc. are Regularly Carried Out as Defined . He Shall Attend other Abnormalities Being Raised By Operations. he Shall Be Familiar with Oil and Gas Industry Safety Standards and Shall Ensure Full Safety Measures in Accordance with Companys Fire and Safety Regulations, Hsems. He Shall Attend Call-out Duties After Normal Working Hours. He Shall Display Leadership and Shall Possess Good Oral and Written Communication Skills to Direct the Work.